Send Enquiry

N2s Technologies Private Limited

Send Enquiry

Product Name : Injection Mold Clamp


Description :
The clamping unit of the plastic injection machine defines the mold sizes in the plastic processing industries. The mould clamp are available at different models according to the machine sizes and the output mould parts. When the part is molded, it is then removed and taken out with Sprue Picker or Economic AC Servo Traversing Robot.The mold clamps help hold the mold on the injection machines and die plates on the movable platen. The clamp is adjustable, and hence the easy replacements of the required size vary concerning the mould part.

View Contact Details
Mr. Suriya Deva 16/1, Corporation Road, Opposite To Axis Bank ATM, Perungudi

Hopper Loader- Separated

Loaders are the simplest version of a ‘resin conveying system’ but they are not an integral part of a central conveying system. Self-contained vacuum loaders are used to transfer pellets, regrind and powders from a singl

Injection Mold Clamp

The clamping unit of the plastic injection machine defines the mold sizes in the plastic processing industries. The mould clamp are available at different models according to the machine sizes and the output mould parts.

Pressure Sensor

A pressure transducer is a device which converts an applied pressure into a measurable electrical signal. A pressure transducer consists of two main parts, an elastic material which will deform when exposed to a pressuri

Hopper Magnet For Hopper Dryer

Hopper magnet are equipped with powerful ferrite magnets or high energy Neodymium Iron Boron (NdFeB) magnets, which build up a strong and dense magnetic field around the extent, and the construction has a high degree of

Standard Hopper Dryer

Hopper dryers installed in injection molding machines are capable of producing a large quantity of molded products and various molded parts. They adopt a hot air down-blowing design and use stainless steel material hoppe

Hopper Dryer Accessories

MATERIAL STORAGE TANK: Customized tank available for all sizes of S/S hopper DUST COLLECTOR: Additional dust collector installed to avoid plastic particles splashing and provide a clean environment. MAGNETIC SEPARATOR: I

Vertical Color Mixer

Color mixer is widely used for mixing, stirring powder and granule materials. Mixing can be done in a short period of time and it has high performance. Both mixing barrel and the mixer are made up of stainless steel and

Plastic Crushing Machine

Plastic Crusher – v type series are applicable in a wide range, can meet a wide variety of requirements, and also able to granulate & recycle all kinds of plastics material of different textures and shapes. Pl